|
|
|
|
Specifying Spatial Outputs |
Optionally, you can include spatial outputs with Property Exposure analysis results. Spatial outputs are based on pre-generated data, such as results from a detailed loss analysis that were saved by location.
| If you select "Workers' Compensation" as the exposure type, you can only configure a Rings analysis and enable dynamic results. As a result, certain functions—Accumulate Values by zones, custom boundaries, event footprints, and hazard boundaries; Spatial Outputs; and Analysis Options (including Reinsurance)—will not be available. |
There are several spatial outputs:
• Static hazard layers (pre-loaded into Touchstone databases)
• Custom hazard layers
• Detailed loss results
• Additional attributes (primary and secondary risk characteristics)
When you select any of the spatial outputs, the Enable Dynamic Results check box is automatically selected and you cannot clear the option.
|
© 2020 AIR Worldwide. All rights reserved. Touchstone 6.0 Updated September 03, 2020 |
